How to preserve nano silica powder? Is silicon powder easy to be oxidized?

Thanks for using aii article generator（ http://www.aiivip.com )

Nano silica powder

How to preserve nano silica powder? Is silicon powder easy to be oxidized?

The finer the particle size, the easier the oxidation. Do not expose to the air for a long time, which has little impact. Some applications with a little oxygen have more outstanding performance.

Different uses of micro silicon powder and micro silicon powder

Is nano silica powder dissolved in water?

Nano silica powder is insoluble in water.

Introduction of nano silicon

Nanocrystalline silicon refers to crystalline silicon particles with a diameter of less than 5 nanometers (one billionth (1G) of a meter). Nano silica powder has the characteristics of high purity, small particle size and uniform distribution. With large specific surface area, high surface activity and low loose packing density, the product is non-toxic, tasteless and has good activity. Nano silicon powder is a new generation of optoelectronic semiconductor materials, which has a wide gap energy semiconductor and is also a high power light source material.

What is the hardest and most wear-resistant floor on the market

Suzhou Fengxing Environmental Engineering Co., Ltd

Address: No. 2, Taishan Road, High tech Zone, Suzhou

Hotline:--

Tel.:-

Fax:-

Email: fonxon@.com

Nano silicon super hard and wear-resistant floor

Product model: FONXON-SI-

[Overview]

·Nano silicon super hard and super wear-resistant floor is the hardest and most wear-resistant industrial floor today, and it is a model of nano technology applied to industrial floor field.

·FONXON owns the independent intellectual property rights of nano silicon dispersion and its construction process.

·The core technology is to use nanotechnology to liquefy SiO2 under neutral conditions to generate nano SiO2 dispersion with high concentration, high purity and high solid content.

·Hydrophobic construction technology determines that nano silica dispersion can penetrate deeper, react more fully and have more significant effect.

·The utility model avoids the malpractice generated when the strong alkaline curing agent is used to treat the concrete, and makes the floor harder and more wear-resistant.

[Raw materials]

·FONXON active nano SiO2 dispersion.

[Raw material properties]

·Neutral colorless transparent liquid.

·It does not contain lithium, potassium, sodium and other alkaline substances.

[Reaction principle]

·Through rapid deep penetration, nano SiO2 reacts with the remaining Ca (OH) in the concrete to generate stable silicon materials and fill the tiny cracks in the concrete.

[Reaction effect]

·Quickly increase the compactness and surface hardness of the concrete layer, and greatly improve the pressure resistance, wear resistance and dust prevention capacity of the floor.

[Floor performance]

·Surface hardness: Mohs hardness 7-8, equivalent to the hardness of jade.

·Wear resistance: 3.88 (/)/g, measured by ball bearing method.

·Yellowing resistance: excellent.

·Anti slip performance: excellent.

·Service life: long.

[Floor appearance]

·Through different levels of grinding and polishing, different appearance effects can be achieved, even mirror effect.

·It can deepen the original ground color, but cannot cover the color difference and defects of the original base surface.

·If the color is required, it can only be used together with the emery wear-resistant floor.

[Scope of application]

·Areas with high requirements for wear resistance and pressure resistance and general requirements for chemical resistance.

·Areas with hidden danger of waterproof treatment in the ground floor or basement.

·Reconstruction of the old floor under the condition of not stopping production. Map

This data is from the map, and the final result is subject to the latest data of the map.

Inquiry us