News

  • 0
  • 0

Physicochemical properties and application of molybdenum disilicide MoSi2

A wave of layoffs that has swept the entire Internet industry has intensified. China's Internet industry has experienced several crises and major changes in the past development process. There is also a "brief history of layoffs by major Internet companies". Hot search, JD.com has a wide range of layoffs in this round of layoffs, and all its subsidiaries are involved. Most of the layoffs are between 10% and 20%. Among them, Jingxi Guangdong and other theaters have all laid off staff. Tencent also reported the news of downsizing and layoffs. Among them, Tencent PCG (Platform User Content Business Group) laid off 30% of its staff, iQiyi laid off 12% of its staff, Kuaishou was reported to have laid off 30% of its staff, and the e-sports department of Station B laid off 90% of its staff.
Mass layoffs on the internet have created a host of socioeconomic issues, including Molybdenum disilicide MoSi2 powder.

Molybdenum disilicide MoSi2 powder overview

Molybdenum disilicide MoSi2 powder  is an inorganic compound with the chemical formula MoSi2, which is a gray metallic solid. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid. The radii of the two kinds of atoms are not much different, the electronegativity is relatively close, and they have properties similar to those of metals and ceramics. Molybdenum disilicide is conductive and can form a passivation layer of silicon dioxide on the surface at high temperatures to prevent further oxidation. It is used in high-temperature anti-oxidation coating materials, electric heating elements, integrated electrode films, structural materials, reinforcing agents for composite materials, wear-resistant materials, and connecting materials for structural ceramics.

Physicochemical properties of molybdenum disilicide MoSi2

Molybdenum disilicide MoSi2 is an intermediate phase with the highest silicon content in the Mo-Si binary alloy system, and it is a Dalton-type intermetallic compound with a fixed composition. With the dual characteristics of metal and ceramics, it is a high-temperature material with excellent performance. Very good high temperature oxidation resistance, the oxidation resistance temperature is as high as 1600℃, which is equivalent to SiC; moderate density (6.24g/cm3); low thermal expansion coefficient (8.1×10-6K-1); good electrical and thermal conductivity Properties; higher brittle-to-ductile transition temperature (1000℃) below has ceramic-like hardness and brittleness. It is metal-like soft plasticity above 1000°C. MoSi is mainly used as heating elements, integrated circuits, high-temperature anti-oxidation coatings and high-temperature structural materials.

In MoSi2, molybdenum and silicon are connected by metal bonds, and silicon and silicon are connected by covalent bonds. Molybdenum disilicide is a gray tetragonal crystal. It is insoluble in general mineral acids (including aqua regia), but soluble in a mixed acid of nitric acid and hydrofluoric acid. It has good high temperature oxidation resistance and can be used as a heating element working in high temperature (<1700°C) oxidizing atmosphere.

In an oxidizing atmosphere, a protective film is formed on the surface of the dense quartz glass (SiO2) that burns at a high temperature to prevent continuous oxidation of molybdenum disilicide. When the temperature of the heating element is higher than 1700°C, a SiO2 protective film is formed, which fuses at a melting point of 1710°C, and merges with SiO2 into a molten drop. Because of the action of its surface extension, it loses its protective ability. Under the action of the oxidant, when the element is used continuously, it forms a protective film again. It should be noted that due to the strong oxidation at low temperatures, this element cannot be used for a long time in a temperature environment of 400-700°C.

Molybdenum disilicide MoSi2 powder application

Molybdenum disilicide MoSi2 is used in high-temperature oxidation-resistant coating materials, electric heating elements, integrated electrode membranes, structural materials, composite reinforcement materials, wear-resistant materials, structural ceramic connecting materials and other fields, and are distributed in the following industries:

1) Energy and chemical industry: MoSi2 is used as electric heating element, high temperature heat exchanger of atomic reactor device, gas burner, high temperature thermocouple and its protection tube, smelting vessel crucible (used for smelting sodium, lithium, lead, bismuth, tin and other metals) .

2) Microelectronics industry: MoSi2 and other refractory metal silicides Ti5Si3, WSi2, TaSi2, etc. are important candidates for large-scale integrated circuit gates and interconnections.

3) Aerospace industry: MoSi2 as a high-temperature anti-oxidation coating material, especially as a material for turbine engine components, such as blades, impellers, combustion chambers, nozzles and sealing devices, has been widely and in-depth Research and application.

{xunruicms_img_title}

4) Automobile industry: Molybdenum disilicide MoSi2 is used in automobile turbocharger rotors, valve bodies, spark plugs and engine parts.

Molybdenum disilicide MoSi2 price

The price of molybdenum disilicide MoSi2 varies randomly with factors such as production costs, transportation costs, international conditions, exchange rates, and the supply and demand relationship of molybdenum disilicide MoSi2. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for molybdenum disilicide MoSi2 material, please feel free to contact to get the latest price of molybdenum disilicide MoSi2.

Molybdenum disilicide MoSi2 supplier

As a global supplier of molybdenum disilicide MoSi2, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium silicide, tantalum silicide, zirconium silicide, etc.). High-purity targets, functional ceramics and structural devices, and provide OEM services.

Chemical Composition of Molybdenum Silicide MoSi2 Powder

MoSi2MoSiCSFeSNi
>99%>60%balance0.2%0.02%0.19%0.015%0.05%


With Tesla's new factory in Germany starting Molybdenum disilicide MoSi2 powder. In the future, the demand for Molybdenum disilicide MoSi2 powder will become more and more extensive. Please feel free to contact us for the latest news on Molybdenum disilicide MoSi2 powder.

Inquery us

Our Latest News

What material is high borosilicate? Use of high borosilicate glass

Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.Back in international markets,…

What is the scope of application of zinc stearate emulsion?

Water-based zinc stearate mainly uses zinc stearate special additives, sandpaper polishing paint, thermal paper sensitizer functional additives, rubber and water-based paint release agents, etc.…

Action principle of boron nitride

Gazprom recently said it had completely suspended gas supplies to Bulgarian Gas company and Polish Oil and Gas Company (PGNiG) because it was not being paid in rubles. Russia said it would resume gas supplies after it agreed to pay for them in ruble…